Newtown, Pa. – NuShield, Inc., the leading manufacturer of screen protectors for electronic devices with LCD displays has now introduced a revolutionary product to help users prevent spills while riding in moving vehicles.

The DrinkSaver is a neoprene ring that will hold any can or bottle steady even on the roughest waters or roads. Just slip your drink through the 3 inch opening and the suction of the neoprene side of the ring will hold the container steady on any non-porous surface, and at any rate of speed.

Not enough cup holders, no problem! Simply attach the ring to your container by sliding it from the bottom of the container upwards, peel it down to within approx. 1/2" or close to the bottom of the container. The closer it is to the bottom of the container, the better suction you will get.

A boater’s best friend, the NuShield DrinkSaver can be used with practically any bottle, mug, can or container. Now you don’t have to clean up soda or beer stains from the carpet after a side wave hits you or if you are riding on rough seas.

You can also use the NuShield DrinkSaver at home, school, work, planes, trains, cars and definitely on the boat! It even holds your drink while riding a Ski-Doo or Sea-Doo or snowmobile and off-road quads.

The NuShield DrinkSaver is available as a set of four rings for $20.00 and can be purchased on the NuShield website.

About NuShield Inc.:

NuShield Inc., based in Newtown, PA, has been the leading provider of screen protectors for LCD touch screens used in electronic devices since 1998 and is sold directly to consumers on its website or through distributors worldwide.

The NuShield DayVue antireflective film is ideally suited for use in outdoor light where sun glare interferes with the clear viewing of the LCD screen. The film filters out 99% of UV light from reaching the screen or reflecting back to the eyes. The NuShield film is also abrasion and chemical resistant and provides a high degree of clarity. The film has an anti-fingerprint layer that makes cleaning the surface easier and improves scratch resistance.

The NuShield AG is an antiglare coated film that is ideally suited for use indoors where it minimizes reflections from overhead lighting and improves viewing angles. The film has a very high scratch resistance (can withstand hard steel wool rubs), excellent solvent resistance and good clarity. The NuShield AG has non-adhesive backing and it installs by either slipping a slightly oversized film into the open space between the screen and the casing or on sealed screens, using a 3/16” clear adhesive tape around the perimeter of the film. The NuShield AG film is available in sizes up to 50” diagonal.

Both NuShield films have been designed to work with LCD screens for an extended period of time without any distortion to the image. NuShield is made of a super thin, durable plastic manufactured using a patented technology that provides extended protection against dust, scratches and gouges.